2D Twin Wire Panel Fence
Description
- 产品描述
-
Product Description
2D twin wire fencing, also known as double wire fencing, features vertical steel wires welded between pairs of horizontal wires. The flat panel construction provides a clean, uniform appearance for commercial, industrial and residential boundaries.
We supply 656 and 868 configurations with 200×50 mm mesh openings. Panels are manufactured from pre-galvanised steel wire with a minimum zinc coating of 30 g/m², then finished with polyester powder coating with a minimum thickness of 100 μm.
Panels have 30 mm vertical wire projections along one edge and are reversible, allowing the projecting ends to be positioned at the top or bottom. Panel dimensions, colours, posts and fixings can be specified for the order.
Product Features
· Twin Horizontal Wires: Paired horizontal wires reinforce the panel and help resist bending.
· Flat Panel Profile: A straight, uniform appearance without V-shaped bends.
· 656 and 868 Options: Two wire configurations to suit different project specifications and budgets.
· Specified Coating System: Pre-galvanised steel wire with zinc coating ≥30 g/m², finished with polyester powder coating ≥100 μm.
· Reversible Panels: 30 mm vertical wire projections along one edge allow installation with the projections at the top or bottom.
· Matching Components: Compatible posts, brackets, clamp plates, caps and fixings can be supplied with the panels.
Specifications
Item Available Specifications Wire configuration — 656 Two 6 mm horizontal wires and one 5 mm vertical wire Wire configuration — 868 Two 8 mm horizontal wires and one 6 mm vertical wire Mesh opening 200 × 50 mm (vertical × horizontal) Panel profile Flat welded panel without V bends Panel heights — 656 630–2,430 mm; available heights confirmed with the order Panel heights — 868 1,030–2,430 mm; available heights confirmed with the order Panel width 2,500 mm standard; 3,000 mm available for selected 868 specifications Wire material Pre-galvanised steel wire Zinc coating on wire Minimum 30 g/m2 Surface finish Polyester powder coating Polyester coating thickness Minimum 100 μm, excluding the underlying zinc coating Colours RAL 6005 green / RAL 7016 anthracite grey / RAL 9005 black; other colours on request Post sections 60 × 40 mm rectangular or 60 × 60 mm square posts Fixings Brackets, clamp plates, caps and compatible fixings Edge configuration 30 mm vertical wire projections along one edge Panel orientation Reversible: projections can be positioned at the top or bottom Applications
· Commercial and industrial property boundaries
· Warehouses and logistics premises
· Residential developments and garden boundaries
· Schools, parks and sports facilities where the project specification permits

Quality Control
Incoming wire diameter, mesh spacing, weld integrity and finished panel dimensions are checked against the agreed specification. Coating checks cover the specified zinc coating, polyester powder coating thickness, colour and surface appearance.
Before packing, panels are checked for visible defects, and sample panels can be assessed for compatibility with the selected posts and fixings. Required inspection records or test documentation should be agreed when ordering.
Packaging & Container Loading
Panels are secured to pallets with protection at contact points to help prevent coating damage during handling. Posts and fittings are grouped and labelled by specification.
Pallet quantities and loading arrangements are planned according to panel dimensions, order quantity and destination handling requirements. Custom labels and packaging can be specified when requesting a quotation.
Frequently Asked Questions
Q1: What do 656 and 868 mean?
These names describe the horizontal-vertical-horizontal wire diameters in millimetres. A 656 panel uses two 6 mm horizontal wires and one 5 mm vertical wire. An 868 panel uses two 8 mm horizontal wires and one 6 mm vertical wire. The wire diameter measurement basis is stated in the quotation.
Q2: What coating system do you use?
Panels are manufactured from pre-galvanised steel wire with a minimum zinc coating of 30 g/m², then finished with polyester powder coating with a minimum thickness of 100 μm. The polyester coating thickness excludes the underlying zinc coating.
Q3: Can the panels be installed with the barbs at the top or bottom?
Yes. Each panel has 30 mm vertical wire projections along one edge and is reversible, allowing installation with the barbs at the top or bottom to suit the project requirements.
Q4: How does a 2D twin wire panel differ from a 3D panel?
A 2D panel has a flat profile with paired horizontal wires. A 3D panel uses pressed V-shaped bends. Compare the wire configuration, panel dimensions, appearance and post system against your project requirements.
Q5: Can you supply matching posts and accessories?
Yes. We supply matching 60×40 mm rectangular or 60×60 mm square posts with compatible brackets, clamp plates, caps and fixings. Post wall thickness, length and mounting details are confirmed for each order. Gates can also be included in a system quotation.
Q6: What information is needed for a quotation?
Please specify 656 or 868, panel height and width, quantity and RAL colour. Include the required posts, fixings, panel orientation, packaging and destination port. A fence layout or project specification helps us confirm the complete supply requirements.
FAQs
Can I get wire mesh fencing samples before bulk order?
What is your minimum order quantity (MOQ)?
Can you customize wire mesh fencing size, coating and colors?
What coating options do you offer for metal fencing?
Do you supply full sets of fencing posts & accessories?
What is your production & lead time for bulk orders?
2D Twin Wire Panel Fence
OUR SERVICE
We offers a wealth of product support resources, including a range of technical and downloadable product manuals to product certifications.
Our Service

